TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

W-9 Questions

Welcome Guest, Log in or Register

Author

Red48m

12-30-2006 10:18:08

Report to Moderator

I recently started working on a '46 Miccormick W-9. The tractor runs, but needs alot of work, and I have some questions. 1.Where can I buy a new rubber shift boot?
2.Are rebuild parts availible for the fuel pump, or is it best to just use gravity feed?
3.Is the mag. different from the ones used on the H or M? I want to buy a junk mag. and rebuild it as the one on the tractor works, but the impulse is broke. If you have a correct mag. for this tractor let me know. 4.Any advice on getting more power out of the old beast will help.
Thanks in advance everyone!

[Log in to Reply] [No Email]

mtdan

01-02-2007 05:05:41

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 10:18:08

try Alderson Tractor in Sigourney IA. Darrell was Very helpful with parts for my W9. 641-624-2275

[Log in to Reply] [No Email]

Super 9

12-31-2006 15:24:57

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 10:18:08

Berkshire imp. Co 574 643 3115 Shift boot 24.00

[Log in to Reply] [No Email]

P Backus

12-31-2006 12:41:55

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 10:18:08

If your tractor has fuel pump on it, the motor has been replaced with a crawler motor, or just a factory "crate" motor, set up with the pump. I"d just bypass the pump, or take it off. Those pumps were common and can be rebuilt easily, or go to NAPA and get new diaphragm material and rebuild it yourself.
Paul

[Log in to Reply] [No Email]

Red48m

12-30-2006 12:34:21

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 10:18:08

Heres a pic if anyone is interested. email is open

[Log in to Reply] [No Email]

Wardner

12-30-2006 14:07:36

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 12:34:21

I have an I-9 mag but the distributor cap has been off for many years. All the IH caps may be the same. My parts books would confirm that statement.

D Slater has determined that the rotation is different from the other IH gas mags. The gas and diesel turn in the same direction on the big tractors. However, the gas and diesel use different part numbers.

If you have an interest my mag, email me. I will look for the numbers on it. I can send pics as well.

[Log in to Reply] [No Email]

Roger in Iowa

12-30-2006 11:09:49

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 10:18:08

I can't help on parts as my source is gone.

My WR9 has used gravity feed for 40+ years.

The mag is different than M or H as the rotation is different from one or both. Dad had put on a distributor and advance was backwards and retarded spark.

Original bore was 4.4". Later parts are 4.5" I have three used sleeves and high compression pistons at 4.5" available. More cubes = some more power.

Roger in Iowa

[Log in to Reply] [No Email]

TractorFixr

01-02-2007 18:50:57

Report to Moderator

Re: W-9 Questions in reply to Roger in Iowa, 12-30-2006 11:09:49

I'm interested in the 4.5 P/S - need to know number of rings (3,4,5) - Height of the compression chamber.

General condition of parts.

Please reply to email listed with contact information.

Thanks

[Log in to Reply] [No Email]

Red48m

12-30-2006 18:08:10

Report to Moderator

Re: W-9 Questions in reply to Roger in Iowa, 12-30-2006 11:09:49

Wardner, I sent you a email. Roger in Iowa, do you know if your dad was able to reverse the advance in the distributer so it worked correctly?
Thanks

[Log in to Reply] [No Email]

Roger in Iowa

12-30-2006 19:58:42

Report to Moderator

Re: W-9 Questions in reply to Red48m, 12-30-2006 18:08:10

Dad got another distributor off of another W9.
I do not know if you can reverse directions.

My tractor is under tractor photos. Search for "Rice" and look for Roger.

Roger in Iowa

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy