Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall Hubs

Welcome Guest, Log in or Register
Author 
HGUY

11-21-2006 15:44:10




Report to Moderator

I was wondering if anyone has or knows where i might find a set of 9 bolt bubs to fit my farmall h




[Log in to Reply]   [No Email]
John A.

11-21-2006 20:06:31




Report to Moderator
 Re: Farmall Hubs in reply to HGUY , 11-21-2006 15:44:10  
HGUY, Of course you can go new annd get them. But used, I think that a set of Massey 44 hubes will bolt straight up. Correct Me ANYONE if I am wrong here.
You can caliper the axle and cross referennce to other tractors too. For IH didn't have pressed steel wheels as an opition till much later. Hope this helps.
Later,
John A.



[Log in to Reply]  [No Email]
migraine

11-22-2006 09:03:33




Report to Moderator
 Re: Farmall Hubs in reply to John A., 11-21-2006 20:06:31  
The Massey hubs are interchangeable with the M Farmall but too big for the H. I believe that the only two hubs that work on an H are the MM Z model and the Oliver 77, but the key will have to be milled down a bit to fit in the axle slot and the MM Z hubs are not real heavy but will work fine under 5000 lbs. Correct me if I am wrong. There may be a few 8 bolt hubs off later IH utility models that would work and then use an 8 hole to 9 hole adapter. Just a thought. Migraine

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy