Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Super c Henderson loader

Welcome Guest, Log in or Register
Author 
Need To Know

11-19-2006 08:25:26




Report to Moderator

Can someone spell out how to plumb the hydraulics for my loader(I am ignorant)I have a hose coming from the bottom of the hydraulic block on the Super c touch control that goes to the port marked "out" on the loader control valve.The center port on the control valve goes to one loader cylinder with a jumper to the other cylinder.The Port marked "in" on the control valve is just flopping in the wind.I dont know where this goes.I am assuming it would return to the auxillary hydraulic tank I plumbed up to the fill port on the touch control.It seems me that the "in" and "out" are plumbed backward on the control valve.That is the way that the previous owner had them on his tractor(Or at least that is where they were plumbed up when I got the loader).Help!!!!! !!

[Log in to Reply]   [No Email]
gene bender

11-20-2006 04:13:19




Report to Moderator
 Re: Super c Henderson loader in reply to Need To Know, 11-19-2006 08:25:26  
The small hy line is pressure and the big one is return. My HENDERSON is plumbed from the plug on the small line to in on the control and return to the big line where it goes into the rockshaft assy. The res on mine is a piece of square tube welded to the frame on the left side and plumbed into the filler plug. Some will saw the lines and solder a tee and hook to the control valve on both pressure and return.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy