Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall 340 C-135 Block

Welcome Guest, Log in or Register
Author 
Mike80

11-02-2006 16:24:55




Report to Moderator

Hey all;

Anyone know for sure if the block from a 340 will fit in a C, or are there modifications needed? I can get a 340 block and am wondering if it would fit. Thanks in advance.




[Log in to Reply]   [No Email]
steelfronts

11-03-2006 16:31:26




Report to Moderator
 Re: Farmall 340 C-135 Block in reply to Mike80, 11-02-2006 16:24:55  
Mike80 A Farmall 340 block absolutely will not bolt to your C. The 135 power unit will but the 340 and 504 are all by them selves and wont work without major work.



[Log in to Reply]  [No Email]
Dale in Ar.

11-02-2006 19:54:29




Report to Moderator
 Re: Farmall 340 C-135 Block in reply to Mike80, 11-02-2006 16:24:55  
I am getting ready to bolt up a 135 on to my Super C.I bolted it up to a C bellhousing first and it fit.It will probably bolt up.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy