Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

How to Fill tires

Welcome Guest, Log in or Register
Author 
Matt Williams

11-02-2006 09:39:23




Report to Moderator

I live in Washington and need some weight in the back of my 300U. I don"t have nay kind of hitch in the badk yet, I am working on that though, and would like to fill the tires.
I have read that you can buy calcium CHloride and mix and fill your own but I don"t have a clue where you would buy it.
Where do you get a hose to fit on the tire?
I assume you would jack up the tractor, let all the air out and then drain the fluid in.
I called a tire company and they said they could come out for $80 and fill my tires for $2.5 a gallon.
I assume I should get new tubes if I am going to fill them?
Appreciate your input.
I have a lot of loader work to do in the next couple months and have hills so i really need the weight.
Thanks.

[Log in to Reply]   [No Email]
old

11-02-2006 11:08:34




Report to Moderator
 Re: How to Fill tires in reply to Matt Williams, 11-02-2006 09:39:23  
Drop me an e-mail and I'll send you a page from a 1935 owners manual that shows you how to fill tires with fluid. The page expalin it in simple terms and even shows 3 or 4 ways to fill them. My self I use windshield wpier fluid in my tires now days because it doesn't cause the rims to rust like CACL does

[Log in to Reply]  [No Email]
Pete76NY

11-02-2006 10:51:05




Report to Moderator
 Re: How to Fill tires in reply to Matt Williams, 11-02-2006 09:39:23  
Matt, you can buy the Calcium in bags at any chemical store, or probably agway, the problem with it is twofold: Due to the corrosiveness of the water calcium mix, you need more than just a cheap submersible pump (unless you only want one use), and it will corrode your rims just from the condensation that occurs through the tube due to weather. An alternative that I use is windshield washer fluid. I always use winter formula, and buy it by the gallon as opposed to the concentrated 55 gal drums. (Cheaper by the gallon, and usually if ya give 'em some warning the local Wal-Mart will give you a discount.
The advantages are: price, non-corrosive, and you can economically buy the tools to put it in;
Get a used 55 gallon drum, determine how many gallons for your tire size and pour them in, (add an 8 oz bottle of water bed conditioner to each barrel to control algea), buy a cheap submersible pump, and a special nozzle (available at NAPA or Gemplers) and a standard garden hose. let the air out of your tire via the watervalve (not the air valve) then jack that side of your tractor, keep the valve stem at 12 oclock and attach the hose and begin pumping. Every couple minutes you will need to press the relief valve on the side of the fitting to let the displaced air out (let go once fluid starts to flow through the relief valve). When you feel you are nearly full, disconnect the valve and roll the tire to either 11 or 1 oclock, if fluid comes out the stem you are full, if not add until it does. Once full, replace the watervalve and add air to your desired pressure. Repeat on the other side, the rinse the pump with a little fresh water...done. Closed minded people will tell you that the alcohol will crack the tubes, that the soap in the fluid will make the tire slip...I have been using this stuff in some tractors for 10 plus years, I have had it out of some and had a chance to check the tubes, and am very pleased with it.
Some people will use used anti freeze, but it creates a danger to animals who will lick the sugars in it if you have a flat.
Some use the fluid from beet pulp squeezings, and I hear it's good, but no available in my part of the US (Upstate, NY) The down side to the windshield washer fluid is twofold also: it's a little over 1 pound lighter than a properly mixed calcium water solution, and your recycle guy is gonna be real displeased with you the pick up day after you fill your tires! Pete

[Log in to Reply]  [No Email]
Nat 2

11-02-2006 11:38:10




Report to Moderator
 Re: How to Fill tires in reply to Pete76NY, 11-02-2006 10:51:05  
Pete,

Never seen a "water valve" on a tractor tube, and I've seen many tractor tubes. They all have one valve stem on them, and it's for air or water.

BTW, to the original poster: The garden hose adapter can be purchased at your local Tractor Supply, in the tire section, which is generally in the back left corner of the store by the batteries and truck boxes.



[Log in to Reply]  [No Email]
Pete76NY

11-02-2006 12:04:59




Report to Moderator
 Re: How to Fill tires in reply to Nat 2, 11-02-2006 11:38:10  
Look a little closer...if your tube has a 1 pc valve stem that you can only remove the valve stem...it's an air valve, if it is 2 pcs, a part screws out woth bigger threads and a bigger hole for the fitting, it's called a watervalve!



[Log in to Reply]  [No Email]
Pete76NY

11-02-2006 12:09:18




Report to Moderator
 Re: How to Fill tires in reply to Pete76NY, 11-02-2006 12:04:59  
only remove the valve STEM I mean,



[Log in to Reply]  [No Email]
glennster

11-02-2006 10:07:54




Report to Moderator
 Re: How to Fill tires in reply to Matt Williams, 11-02-2006 09:39:23  
i would put new tubes in if you are going to load the tires. you can get the chloride from your local farm service store or feed supply , also they use chloride as a cement additve, so a construction supply can get it. there are tables that show the tire size, lbs of chloride and gallons of water to use. the fill fitting can be had at your local farm and fleet. you can use one of those little pumps that hook up to a drill to pump the solution in. i usually set the valve at 10:00 oclock position and fill to there, then add air.

[Log in to Reply]  [No Email]
neblinc

11-02-2006 10:02:10




Report to Moderator
 Re: How to Fill tires in reply to Matt Williams, 11-02-2006 09:39:23  
Read through the older post's on the link below, you will get all kinds of opinions ; )

Randy



[Log in to Reply]  [No Email]
IH2444

11-02-2006 09:43:44




Report to Moderator
 Re: How to Fill tires in reply to Matt Williams, 11-02-2006 09:39:23  
I believe gemplers.com has online tutorials about filling tires.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy