TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Farmall rear wheel weights, double up?

Welcome Guest, Log in or Register

Author

arod

10-24-2006 12:09:26

Report to Moderator

I notice that the farmall letter series rear wheel weights have 2 holes available after they are bolted up.

Is this the manner in which a fella adds another set to the same wheel? So he can have 2 on each wheel?

Who has done this, is the second set mated to the existing one, flat face to flat face?

thanks

[Log in to Reply] [No Email]

DaveBN

10-25-2006 16:03:15

Report to Moderator

Re: Farmall rear wheel weights, double up? in reply to arod, 10-24-2006 12:09:26

Each weight is rotated 90 degrees. The first one is installed with four square head bolts in the recessed pockets in the weight and through the holes in the wheel (nuts and lock washers on the inside of the wheel. Subsequent weights are installed by placing the heads of the bolts (2) In the slots on the previous weight and through the holes in the weight you are installing(nuts and lock washers on the outside). This way you can install weights one at a time. I have 2 on each side of my C. Dave.

[Log in to Reply] [No Email]

riverbend

10-24-2006 15:55:04

Report to Moderator

Re: Farmall rear wheel weights, double up? in reply to arod, 10-24-2006 12:09:26

When I added weights to my H they were several 'vintages'. I had to take a grinder to the slots and bolt holes, and clean up the casting flash, to get the last set to line up accurately.

Greg

[Log in to Reply] [No Email]

glennster

10-24-2006 12:55:33

Report to Moderator

Re: Farmall rear wheel weights, double up? in reply to arod, 10-24-2006 12:09:26

i have 3 weights stacked on each axle of my m that has the loader. stack them all the same way. the extra holes line up the weights and the i use bolts and washers where the notches are cut out.

[Log in to Reply] [No Email]

arod

10-24-2006 13:03:19

Report to Moderator

Re: Farmall rear wheel weights, double up? in reply to glennster, 10-24-2006 12:55:33

ahhh, got it. thank you much

[Log in to Reply] [No Email]

Harley

10-24-2006 19:21:23

Report to Moderator

Re: Farmall rear wheel weights, double up? in reply to arod, 10-24-2006 13:03:19

I got 4 on each side of my loader tractor. You can conceivably just keep adding weights if you were so inclined.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy