Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

F20 road gear, ATTN: f20inmi, Nebraska Cowman

Welcome Guest, Log in or Register
Author 
IndianaMike

10-18-2006 20:48:45




Report to Moderator

So I got the unit from the guy yesterday and as luck would have it, the shifter fork was frozen. So I soaked in tranny fluid (on the kitchen table no less) and the fluid went everywhere. Pounded the shift fork out and found out why it was stuck; shaft bent. Wondering if either the Cowman or f20inmi were willing to part with the fork, which is just a shaft with a u-shape one end and threaded on the other. The shaft is 1/2 inch diameter and about 6 or 7 inches long. I don't know whether I can bend it back straight enough to work or not. Also, the input yoke would be nice as well, since it didn't come with one. Just shoot me an email and we'll discuss it.
Thanks,
Michael

[Log in to Reply]   [No Email]
Nebraska Cowman

10-19-2006 04:22:05




Report to Moderator
 Re: F20 road gear, ATTN: f20inmi, Nebraska Cowman in reply to IndianaMike, 10-18-2006 20:48:45  
email sent.
which shaft do you need?



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy