Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall 130 rocker pins

Welcome Guest, Log in or Register
Author 
Farmall Lift

10-17-2006 11:55:36




Report to Moderator

Is there an aftermarket replacement for the rocker pins used on Farmall A, 100, 130 , 140 ?
Pins that are on the lift arms.




[Log in to Reply]   [No Email]
Hugh MacKay

10-17-2006 12:07:26




Report to Moderator
 Re: Farmall 130 rocker pins in reply to Farmall Lift, 10-17-2006 11:55:36  
I assume you are talking about the pins that go in the rochshaft arms of the touch control unit. Those little pins about 1/2" x 1-1/4". I say about as they are not exactly that size. I tried but could not find pins the right size from another source that would match.

You may not want to hear this, but the last time I asked at CaseIH they were still available and cost around $8.00 each. Now, that was close to 20 years ago. Needless to say, I found used ones. I got them from a tractor wrecker.

[Log in to Reply]  [No Email]
SuperA-Tx

10-17-2006 12:57:06




Report to Moderator
 Re: Farmall 130 rocker pins in reply to Hugh MacKay, 10-17-2006 12:07:26  
I checked on those pins (Rockshaft Clevis Pin, part #350 142 R1) a month ago. They are now up too $20.00 each. Yes, thats right, TWENTY dollars each at Case!

The "Rockshaft Clevis Pin Lock" (clip) that holds the pins in were $26.00 each at Case.

Small pin was $2.17 and the spring was $4.28

I made mine myself out of 1/2" x 3" hex head bolts. Cut them off and grind the head down. Cost about $1 not including the labor. Turned out so good my cousin had me make him some and then made some for a friend.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy