Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

300U Carb Float sticking?

Welcome Guest, Log in or Register
Author 
JayWalt

09-05-2006 19:43:54




Report to Moderator

Hey guys, I've had the bowl off and shot a good deal of carb cleaner through the fuel inlet to clean the sticking float. well i thought for sure i got it working good, but it still sticks. How is that valve setup? theres a pin the float pushes up, is there an oring in there or is it just a pin and a machined "seat"
If it is sticking from slop, is there a way to fix it? I havent had it that far apart yet.

[Log in to Reply]   [No Email]
504-1

09-05-2006 20:41:13




Report to Moderator
 Re: 300U Carb Float sticking? in reply to JayWalt, 09-05-2006 19:43:54  
Jay, The pin is the needle valve and it is probley what is sticking. Polish the three points of the valve with fine sand paper.(rust will take up the clearance between the valve and the seat)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy