Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

farmall 140 engine (C123)

Welcome Guest, Log in or Register
Author 
davos

09-04-2006 13:45:43




Report to Moderator

Will this engine fit the farmall "A"s and "B"
Thanks




[Log in to Reply]   [No Email]
K-Mo

09-04-2006 15:13:10




Report to Moderator
 Re: farmall 140 engine (C123) in reply to davos, 09-04-2006 13:45:43  
I think you will have a problem on the "B" with the steering shaft. The "B" didn't have a hydraulic pump.

K-Mo



[Log in to Reply]  [No Email]
Hugh MacKay

09-04-2006 14:58:37




Report to Moderator
 Re: farmall 140 engine (C123) in reply to davos, 09-04-2006 13:45:43  
davos: The engine will bolt up at front and rear. You may encounter some problems with the 140 fan and water pump. The 140 used an automotive type water pump on the fan hub, whereas the older C-123 engines from 100 or 130 had water pump mounted over the bottom block outlet and the fan belt went around 3 pullies. There was a separate generator belt.

I have a Super A, around fan and rad, almost identical to your A or B. I also have a 130 and 140. I've had the rads and fans off all of them. I know I could put Super A rad and sheet metal on my 130 with minor thermostat changes. I would have to do some thinking and calculating before I'd say Super A rad and sheet metal would fit around 140 fan, etc. It probably can be done but your going to run into some fabrication.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy