TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

HELP TA TROUBLE

Welcome Guest, Log in or Register

Author

redneckplowboy69

08-21-2006 20:41:38

Report to Moderator

I have a farmall 400 and the TA is sliping do i have to break the tractor in half to put a new TA clutch in
thanks jason

[Log in to Reply] [No Email]

Kelly C

08-22-2006 20:04:09

Report to Moderator

Re: HELP TA TROUBLE in reply to redneckplowboy69, 08-21-2006 20:41:38

Needs to look like this.

If you want to see how I replaced the TA in my 400. Click the link and find the Farmall 400 link on the left pane of my web site.

My Farmall web site.

[Log in to Reply] [No Email]

magman

08-22-2006 06:43:08

Report to Moderator

Re: HELP TA TROUBLE in reply to redneckplowboy69, 08-21-2006 20:41:38

Make sure its adjusted acording to the manual. Then check Hytran as sugested. Does it whine when you pull it back? When the overrunning clutch was bad in my 300 it would whine like a child in the candy isle at first then go in. I can sell you a rebuild kit for that if you are interested. Alot cheaper than a unit or I can sell you a rebuilt unit also. JON

[Log in to Reply] [No Email]

Wardner

08-21-2006 22:10:26

Report to Moderator

Re: HELP TA TROUBLE in reply to redneckplowboy69, 08-21-2006 20:41:38

If you are not running IH Hy-Tran or equivalant, the oil can prevent the rollers from riding up the ramp and thereby locking the TA. That means slippage.

[Log in to Reply] [No Email]

the tractor vet

08-21-2006 20:51:55

Report to Moderator

Re: HELP TA TROUBLE in reply to redneckplowboy69, 08-21-2006 20:41:38

YEP not once but twice as the center section has to come out.

[Log in to Reply] [No Email]

jpsep

08-22-2006 13:03:47

Report to Moderator

Re: HELP TA TROUBLE in reply to the tractor vet, 08-21-2006 20:51:55

I thought the t/a in a 400 was a dry one???

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy