Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

md piston rings

Welcome Guest, Log in or Register
Author 
shoo_giesty

08-11-2006 21:39:07




Report to Moderator

overhauling my md and was installing the rings on the pistons. the first packet of rings were all marked and that went fine, the second,third and fourth packets are not. the top ring is beveled on the three so i know how that one goes in but the second and third have nothing. based on what i know they could go in either way;correct ?




[Log in to Reply]   [No Email]
banjo

08-13-2006 07:56:52




Report to Moderator
 Re: md piston rings in reply to shoo_giesty, 08-11-2006 21:39:07  
according to the packet that came for my super a , it says if it is not beveled, no dots,does'nt say top, it can go either way.



[Log in to Reply]  [No Email]
magman

08-12-2006 00:00:46




Report to Moderator
 Re: md piston rings in reply to shoo_giesty, 08-11-2006 21:39:07  
I would look at the first set and compare and install them the same. JON



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy