TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

farmall 140 Sickle bar mower

Welcome Guest, Log in or Register

Author

08-06-2006 17:17:50

Report to Moderator

Hello I just bought a farmall 140 with a sickle bar hay mower. The problem is the guy could not find the pulley that mounts to the pto, does anyone know what diameter it should be. Thanks for now,,,,

[Log in to Reply] [No Email]

Hugh MacKay

08-07-2006 02:22:29

Report to Moderator

Re: farmall 140 Sickle bar mower in reply to T, 08-06-2006 17:17:50

T: I see you don't have an answer yet, I looked last evening, said to myself someone will nail this.

If this is am A-22 mower, I had one of these back in the 1960s. There is also an A-23 mower, basically a highway mower and much heavier. I suspect they both use the same pulley. For me, it's been a lot of years, so my memory is a bit rusty. It has to clear the fender, so I'm thinking 6 to 8 inches. As I recall it cleared the fender by about an inch.

Sorry I could be of more help, I just thought activity breeds activity. These mowers were the same from SA through to 140, so if anyone quotes you a figure for one of the other tractors, it will apply to your 140.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy