Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

826 Brakes, Rtight Inop

Welcome Guest, Log in or Register
Author 
Jim Allen

08-04-2006 18:28:23




Report to Moderator

Between about two months ago and now, it seems the right brake on my 826 has gone inop. Started my chisel plowing today, stabbed the brake for a turn and no action. The left works fine. Darn little in the manual on this, but after looking, I guess I can try bleeding it tomorrow. My 826 has the difflock, so that appears to complicate that right assemby. Any other tricks to try or am I facing a brake job.My manual also des not cover the diff lock. How much does that complicate a brake job. As always, gents, thanks in advance. Jim

[Log in to Reply]   [No Email]
the tractor vet

08-04-2006 20:30:04




Report to Moderator
 Re: 826 Brakes, Rtight Inop in reply to Jim Allen, 08-04-2006 18:28:23  
The Diff. lock is just a few more pices and parts to remove before ya get to the drum and it is not a big deal there . What has probably happened is that the splin part of the disk broke off the disks . I would recomend that you get a seal kit and install a new pinion seal and replace the two big O/Rings on the piston and reset the self adjuster and clean up the drum and free up the return springs , if you find any return springs weak or broken replace all with new ones.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy