TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

just how difficult should it be??

Welcome Guest, Log in or Register

Author

KRUSS

07-24-2006 16:49:21

Report to Moderator

I am in need of a distributer cap (or if you prefer mag/ dist. cap) for a Farmall B. Ordered a Westward (Cdn jobber) got one that will fit an H or two that I have, nowwhere deep enough for the B. Ordered one from CNH, closer but still not deep enough. Wife went to the city today with old one in hand (has IHC stamped on it). The nice 20 year old partsman told her that is definitely an oddball, but he could make a conversion for $ 400 Cdn. Luckily he was talking to my wife and not me. I have what I'm sure is the same cap on an A a C and this B and I think all are originals (with mag). Can anybody help me out with a part number????? ? I know don't tell me I need a parts book. I'm also trying hard to get this B running for a parade in 10 days. (also hope to parade A, C, H, M, W4 and W6.

[Log in to Reply] [No Email]

Nebraska Cowman

07-24-2006 17:52:57

Report to Moderator

Re: just how difficult should it be?? in reply to KRUSS, 07-24-2006 16:49:21

So, is it a Magneto or a Distributor? IH only made a million of each and caps are readily available everywhere.

Dist cap on left, mag on right, notice mag cap is taller.

third party image

[Log in to Reply] [No Email]

KRUSS

07-24-2006 20:03:53

Report to Moderator

Re: just how difficult should it be?? in reply to Nebraska Cowman, 07-24-2006 17:52:57

It is a mag cap I need, the one on the right, the deep one. Can you give me a parts number PLEASE ?? thank you.

[Log in to Reply] [No Email]

CNKS

07-25-2006 19:49:10

Report to Moderator

Re: just how difficult should it be?? in reply to KRUSS, 07-24-2006 20:03:53

I gave you a parts number, see below.

[Log in to Reply] [No Email]

Bob

07-25-2006 04:38:53

Report to Moderator

Re: just how difficult should it be?? in reply to KRUSS, 07-24-2006 20:03:53

Here's a cap from a common US jobber:

Third Party Image

I wonder if your parts guys up there can cross this #?

[Log in to Reply] [No Email]

CNKS

07-24-2006 17:27:46

Report to Moderator

Re: just how difficult should it be?? in reply to KRUSS, 07-24-2006 16:49:21

47413 DYC, includes brush, 47413 DXC with no brush. Those are for an H4 mag, if you have another mag that may be your problem. These numbers are out of my Super A, C, and H parts books. An H4 is an H4. The mag caps are not the same as the ones for a distributer. In my C, H, M, etc books that number is 351693 R92. And, it DOES help to have a parts book, because then you have a number to give the 20 year old, he may even have enough sense to look it up.

[Log in to Reply] [No Email]

Red Dave

07-24-2006 17:17:14

Report to Moderator

Re: just how difficult should it be?? in reply to KRUSS, 07-24-2006 16:49:21

I don't know what is on your tractor. But from the factory a Farmall B had an IH model H4 magneto on it. It is the same magneto as an A, AV, BN, C, H, M, W4, W6 and several balers.

A Case/IH dealer will have them, as will many aftermarket parts houses. You could also probably get one from this site.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy