Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

400 hydraulic uh oh --funny when it isn't you!

Welcome Guest, Log in or Register
Author 
karl f

06-18-2006 11:23:24




Report to Moderator

replaced the hydraulic pump on the 400 finally. pretty straight forward. also replaced the screen in the reservoir. that was a good idea! that thing was plugged completely with crap. and where it wasnt plugged, it had rotted away letting everything through! started tractor, lots of noise from the control valve area, then that cleared up. fast hitch can now pick up the tractor. when pulling the remote valves to test operation, i broke a hose to a coupler. also the pressure side hose from the pump started to weep in 3 places! guess that stuff is pretty rotten inside! and the pump hose is the newest one on the tractor! i cant tell if it is supposed to be there or if it was added though. but at any rate it needs to be replaced.

does anyone know if the gaskets are still available for the top side of the reservoir? IH dealer could not find a current number. -thanks karl f

[Log in to Reply]   [No Email]
Farmall Frank

06-18-2006 11:52:30




Report to Moderator
 Re: 400 hydraulic uh oh --funny when it isn't you! in reply to karl f, 06-18-2006 11:23:24  
Tell the IH guy to look for 361443R1, which is the Reservoir Top Cover Plate gasket.

If you're talking about the gasket under the Control Valve Column,that number is 361452R1.

I'd probably just make one if the IH guy can't come through.



[Log in to Reply]  [No Email]
CNKS

06-18-2006 11:29:02




Report to Moderator
 Re: 400 hydraulic uh oh --funny when it isn't you! in reply to karl f, 06-18-2006 11:23:24  
Case IH has gaskets for most everything. I don't have a 400, but I always get parts books, his computer updates the numbers I give him. He should be able to find the gasket, though, just not trying hard enough. Perhaps someone here will look it up for you.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy