Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

856 Head/Gasket questions??????

Welcome Guest, Log in or Register
Author 
Butch WI

05-27-2006 07:52:25




Report to Moderator

WE would like to get Dad's 856 running again but the head gasket appears to be missing some hole. The holes missing are for coolant passages (small ones) and other holes that have expansion plugs. Do these holes need to be opened to correspond to the head and the block?? or are the head and the block used on different models? Is the gasket going to be what is needed for this application? The Tractor has no turbo! We are concerened about hot spots in the head!! I have pictures that I will try to get on the next post!

Thanks!!

Butch

[Log in to Reply]   [No Email]
the tractor vet

05-27-2006 17:36:11




Report to Moderator
 Re: 856 Head/Gasket questions?????? in reply to Butch WI, 05-27-2006 07:52:25  
Get the gskt for the D 407 and stick it on as myself i have realy never looked i open the box and stick it on .



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy