Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Carburator settigs H

Welcome Guest, Log in or Register
Author 
Indian Gary

05-21-2006 19:45:31




Report to Moderator

Could someone tell me the factory settings for the mixture and main jet screws on my H. Also anything you can tell me about the govenor set screw. Thanks




[Log in to Reply]   [No Email]
Allan In NE

05-22-2006 04:37:27




Report to Moderator
 Re: Carburator settigs H in reply to Indian Gary, 05-21-2006 19:45:31  
Gary,

In addition to what Rusty has stated, you have to lower that governor speed screw down enough so that the carb will run off of it's idle circuit.

If the idle speed screw is set too high, the carb will just want to run off the high side and the idle mixture screw will have very little effect.

Hope this makes sense,

Allan



[Log in to Reply]  [No Email]
RustyFarmall

05-21-2006 21:39:29




Report to Moderator
 Re: Carburator settigs H in reply to Indian Gary, 05-21-2006 19:45:31  
The idle mixture screw is set at 1 1/2 turns out. The load mixture screw is set at 3 turns out.



[Log in to Reply]  [No Email]
Indian Gary

05-22-2006 20:29:36




Report to Moderator
 Re: Carburator settigs H in reply to RustyFarmall, 05-21-2006 21:39:29  
Thanks Rusty, which screw is which (one on bottom of carb and one on side)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy