TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

IH 756 stuck in forward or reverse

Welcome Guest, Log in or Register

Author

John25 in MO

05-19-2006 21:10:58

Report to Moderator

When I depress the clutch to shift from forward to reverse the shifter lever seems stuck. If I turn the engine off I can shift it. I tried adjusting the clutch rod because it seems like it's not dissenging but then the clutch slips. I know nothing about hydrolic clutchs. Am I adjusting the right place or is there something else I should look for. Help!

John

[Log in to Reply] [No Email]

Janicholson

05-20-2006 11:04:10

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to John25 in MO, 05-19-2006 21:10:58

The tractor Vet is correct, however noone has indicated that the manuals are available on this site. At the very top of the left link column is manuals, there are a bunch listed for your unit. Binders Books also has them.
JimN

[Log in to Reply] [No Email]

John25 in MO

05-20-2006 11:08:54

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to Janicholson, 05-20-2006 11:04:10

Thanks, John

[Log in to Reply] [No Email]

the tractor vet

05-20-2006 06:43:40

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to John25 in MO, 05-19-2006 21:10:58

Not only do you have to have the free travel set correctly but also the T/A dump valve and transmission brake . Now if ya do not know what i am talkeing about then i would suggest that you get and I T manual and read up on what is what you you know what i am talken about and also make sure that the oil lite comes on in the dash as this will need to be working . After ya know where the dump valve is and transmission brake are i will walk you thru the propper way of doing it as i have a way of doing it that works real well and no silly massuren to do that nobody ever gets wright . the only place that you have to use a massuren stick is for the free travel of the clutch , myself i made up a go nogo block that i use for the )6 seires and one for the 56' and also the 66's that way ya just slide it in and adjust and you are there. . When the adjustments are correct they will shift with two fingers .

[Log in to Reply] [No Email]

John25 in MO

05-20-2006 10:54:41

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to the tractor vet, 05-20-2006 06:43:40

Vet,
I drove to the IH/Case dealer this morning. He didn't list a service manual any more. They didn't even have one on their service bench. Is this something that could walk me through? Or, is there a place that you know that I can get a manual? Thanks, John

PS: shifting with two fingers would be just fine. Heck, right now I'd use my foot if I could!

[Log in to Reply] [No Email]

Nat 2

05-20-2006 18:12:24

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to John25 in MO, 05-20-2006 10:54:41

I feel bad for ya, because you've got one of those Case IH dealers with a guy behind the parts desk that doesn't know jack. He wouldn't be able to find his head if it wasn't attached.

You don't want the IH service manual anyway. You want the I&T manual, like the tractor vet was talking about. These you can get on Ebay, at your local Tractor Supply, on this site, or at many dozens of other tractor parts sites.

[Log in to Reply] [No Email]

John25 in MO

05-20-2006 19:24:54

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to Nat 2, 05-20-2006 18:12:24

Thank's Nat! I ordered the manuals from this site earlier today.

[Log in to Reply] [No Email]

John25 in MO

05-20-2006 08:22:29

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to the tractor vet, 05-20-2006 06:43:40

I"ll go up to the IH/Case dealer this morning to see if they have a manual and get back with you. Thanks alot.

[Log in to Reply] [No Email]

Allan In NE

05-20-2006 06:58:47

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to the tractor vet, 05-20-2006 06:43:40

Vet,

Is there any way we can set it up so that it will shift with one finger? :>)

Allan

[Log in to Reply] [No Email]

the tractor vet

05-20-2006 07:06:42

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to Allan In NE, 05-20-2006 06:58:47

I am waving the one finge at ya.

[Log in to Reply] [No Email]

Allan In NE

05-20-2006 07:33:43

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to the tractor vet, 05-20-2006 07:06:42

ROFLMAO!!!!! !

[Log in to Reply] [No Email]

wolfman

05-20-2006 17:58:28

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to Allan In NE, 05-20-2006 07:33:43

OK; Short on puzzle skills tonight. What's the ruffled mayo? Wolfy.

[Log in to Reply] [No Email]

Nat 2

05-20-2006 18:08:53

Report to Moderator

Re: IH 756 stuck in forward or reverse in reply to wolfman, 05-20-2006 17:58:28

You need to brush up on your Internet lingo:

ROFLMAO = Rolling On Floor Laughing My A$$ Off

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy