Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!!

Welcome Guest, Log in or Register
Author 
Farmallkid From

05-10-2006 16:45:48




Report to Moderator

Ok, there is a guy from Mich, who bought an H last year to haul his boat in and out of the lake Erie, he has a cottage In the provincial park just down the road, he was talkin to his neighbour, about his tractor not starting cause it sat for a year OUTSIDE. His neighbour(we put a clutch in his h last year) told us. So we go over and check it out after church on sunday, He said we could take it to get it going, so we towed it home on monday, bin tinkerin with it ever since. Here is what we have done. New spark plugs, New plug Wires, new distributor cap on mag, new tune up kit in mag.new kit in carburator. Once we took the mag to the old fella down the road, after some testing we found out the cap was no good. so off to J&M for a new cap. We got it timed, put the mag on and it ran. it ran for about 10 mins. So i shut it off. Later on my brother goes to start it, and it wouldn"t go, just backfires real loud out the muffler. So we check the timing, its good. Last night at tim hortons we were talkin bout it, and one guy said the carb could be sucking air, since the gasket between the two pieces was shot, So today my brother got a carb kit stuck it in there. Still now go. So after dickin with it for a long time, we go for a drive, come back and try again, so i take #4 plug out hold it close to the hole to triplecheck if we got spark, so my bro hit the switch, and i saw spark then it fired up and started to run, but i said to him to shut it off, probably should have let it run., So we tried again. No go. We are stumped! When it runs it runs good. What are we missing? The wiring is old and there are some bare spots, so i covered them with electrical tape. Should we rewire it, could it be shorting out somewhere and cause it to not start and backfire? This tractor is not going into town to the repair shop, we are bound and determinded to fix it ourselves. Sorry for the long post.

[Log in to Reply]   [No Email]
Sloroll

05-11-2006 12:20:30




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
Double check your firing order too.



[Log in to Reply]  [No Email]
Farmallkid From Ont,

05-11-2006 10:34:53




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
Thanks for all the idea"s. We will try once it is done raining.



[Log in to Reply]  [No Email]
jal-SD

05-11-2006 06:49:42




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
Have you disconnected the mag ground wire & tried it? Sometimes the mag ground wire shorts out through the insulation, you often can't see where it is shorting & it might not do it all the time. Try it with the ground wire disconnected & see what happens. (My $0.02 worth. jal-SD)



[Log in to Reply]  [No Email]
Nebraska Cowman

05-10-2006 16:56:39




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
I don't know Mitch but an old habit I picked up before you were born is to twist the push-pull back and forth a little so it makes good contact.



[Log in to Reply]  [No Email]
brainerd dave

05-11-2006 04:33:47




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Nebraska Cowman, 05-10-2006 16:56:39  
Yep, that old back button catches me all the time.



[Log in to Reply]  [No Email]
Nebraska Cowman

05-10-2006 16:56:41




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
I don't know Mitch but an old habit I picked up before you were born is to twist the push-pull back and forth a little so it makes good contact.



[Log in to Reply]  [No Email]
Nebraska Cowman

05-10-2006 16:56:40




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
I don't know Mitch but an old habit I picked up before you were born is to twist the push-pull back and forth a little so it makes good contact.



[Log in to Reply]  [No Email]
Nebraska Cowman

05-10-2006 16:56:40




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
I don't know Mitch but an old habit I picked up before you were born is to twist the push-pull back and forth a little so it makes good contact.



[Log in to Reply]  [No Email]
Nebraska Cowman

05-10-2006 16:56:06




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
I don't know Mitch but an old habit I picked up before you were born is to twist the push-pull back and forth a little so it makes good contact.



[Log in to Reply]  [No Email]
Michael Soldan

05-10-2006 16:54:29




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
Framallkid, don't you dare torch that H !! I'm thinking that backfiring is from too much air, in the fuel mixture or sucking air at the manifold gasket , is it snug?....Mike in Exeter Ontario



[Log in to Reply]  [No Email]
Allan In NE

05-10-2006 16:50:36




Report to Moderator
 Re: gonna BURN this dang H !!!!!!!!!!!!!!!!!!!!! in reply to Farmallkid From Ont,, 05-10-2006 16:45:48  
Kid,

You're not chokin' it to death are ya (runs after you leave it set fer a spell)?

Hs just can't stand a lot of choke.

Dunno,

Allan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy