Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
Order Farmall Cub Parts Online

cub rear main oil seal

Welcome Guest, Log in or Register
Author 
william wolfe

04-26-2006 12:57:18




Report to Moderator

is there a difference in seal in different yearsof the cub? i just put one in from a victor set and it leaked bad took it out and checked it with old one and it is wider than it. just was wondering cub is a 58 lowboy , thanks




[Log in to Reply]   [No Email]
Merlin

04-26-2006 23:27:24




Report to Moderator
 Re: cub rear main oil seal in reply to william wolfe, 04-26-2006 12:57:18  
William, the seals are interchangeable. The problem lies in the seal being an after market and all after markets I"ve seen spins in the seal housing causing it to leak. The standard procedure now is to put your choice of (preferable) hi temp sealer (silicone?) around the outside edge of the seal before installing it it the seal retainer. I say your choice because there has been so much written about this subject and everyone has their own remedy.

[Log in to Reply]  [No Email]
william wolfe

04-27-2006 05:43:20




Report to Moderator
 Re: cub rear main oil seal in reply to Merlin, 04-26-2006 23:27:24  
what i found out is when you lay both seals on a flat surface the new one is about 1/8 in taller that ih one so the fly wheel was riding on the seal it self ,i have another one comming to see if there is a difference. 10-4 on the sealer



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy