TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

TD-6 TDBKM71701 264 or 281 ?

Welcome Guest, Log in or Register

Author

Guy Votuc

04-25-2006 06:52:22

Report to Moderator

Hi All,

I have a old TD-6 I'm trying to ID in case I need to do a head pull or piston job since "unsticking" it. My understanding is this motor was originally a 264 with 3.875 bore but may have/can be sleeved as a 281 with 4in bore. Anyway to tell without actually tearing it apart first ?

[Log in to Reply] [No Email]

Dave Slater

04-25-2006 08:35:28

Report to Moderator

Re: TD-6 TDBKM71701 264 or 281 ? in reply to Guy Votuc, 04-25-2006 06:52:22

You can go by engine serial # to find out what it was originaly.The # is on left front side of block above injection pump and just below head and may have engine size stamped there before serial #. If no serial # it may be replacement block.Think they used 248,264 and,281 but I don't have the serial # breakdown to when they changed. Some may have been called 6 A .Trouble is if it was rebuilt and it was 248, 3 7/8 inch bore it could be replaced with 4 inch and if it was 264, 4 inch it could be replaced with 4 1/8 which is 281.The only sure way to know is take it apart.

[Log in to Reply] [No Email]

Guy Votuc

04-25-2006 08:40:21

Report to Moderator

Re: TD-6 TDBKM7101 264 or 281 ? in reply to Dave Slater, 04-25-2006 08:35:28

The number posted IS the engine serial number in the location you mention. TDBKM7101

Thanks,
Guy

[Log in to Reply] [No Email]

Dave Slater

04-25-2006 10:52:59

Report to Moderator

Re: TD-6 TDBKM7101 264 or 281 ? in reply to Guy Votuc, 04-25-2006 08:40:21

Okay,I didn't look at letters after TD6 close enough.Was thinking you posted machine serial #. Think toros right 248 originaly.

[Log in to Reply] [No Email]

El Toro

04-25-2006 08:24:05

Report to Moderator

Re: TD-6 TDBKM71701 264 or 281 ? in reply to Guy Votuc, 04-25-2006 06:52:22

Your engine is probably the 248cid engine, the 264
was used in the Super MD. Should be able to install an oversize sleeve kit to raise the cid to 264. Hal

[Log in to Reply] [No Email]

Paul in Mich

04-25-2006 07:07:36

Report to Moderator

Re: TD-6 TDBKM71701 264 or 281 ? in reply to Guy Votuc, 04-25-2006 06:52:22

Guy,
The TD-6 had the same engine as the MD. If you find it difficult getting shop service manual for the TD-6, Find one for the MD and all engine procedures and parts are the same. I have one that covers the 6, 6A, 264, 281, 9, 9a, and 350 series. If you E.mail me, I will give you the name, address, and phone number of the guy I bought my manual from.

[Log in to Reply] [No Email]

Guy Votuc

04-25-2006 08:37:43

Report to Moderator

Re: TD-6 TDBKM71701 248 or 264 ? in reply to Paul in Mich, 04-25-2006 07:07:36

Thanks, I messed up the original CID. It is or was of course a 248.. I do have that same manual (ISS-1035b)for the 6,6A, 264, 281 etc series. Good book. I was just hoping to determine if it was already sleeved to the 264 but I guess I would actually have to measure the bore to know for sure ?

Guy

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy