Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

tractor parades,

Welcome Guest, Log in or Register
Author 
kirk in ks,

04-23-2006 06:06:50




Report to Moderator

I was in this old tractor parade yesterday,
But when i was in it, my W-6 was making this wierd niose, and I found out what ity was,
It was the hydralic pump that didnt have enough oil in it and was making noise,
I went to go home, and I coudnt get it to go,
So I put it on side of road and left it there all night,
I didnt know that the hydralic pump was connected
to the fan pully, and it wouldnt let the engine
rev up like it was supposed to,
Ohhh Man IT GOT HOT,Dear God,WOWSIE!!!!!
I was a little nervous as it looked like i ruined
it , But i think it will be ok,when i fill the hyd tank with oil
Do H,s have a slower gear than a W-6?
Cause i was following this guy,and i was in 5th
On a whiff of throttle,and I had to keep clutching it to slow down,& not run into this guy in front of me who was just piddeling along,
going too slow,
As 4th was too slow,I didnt know what to do, so i just went along,till the parade was over
Kind of got on my nerve,s,as the W-6,s have 4 short gear,s,then the 5th one is real tall,Kind of a hassle to get going in a parade,
So If anyone of you is in a parade of tractor,s,
then make sure that the tractor has a decent cruise gear, or you will be forever frutrated!

[Log in to Reply]   [No Email]
Randy in NE

04-24-2006 04:12:01




Report to Moderator
 Re: tractor parades, in reply to kirk in ks,, 04-23-2006 06:06:50  
You must have been in one fast moving parade. I drive my C in parades and I usually have to drive in first gear and I still have to do some clutching at times.



[Log in to Reply]  [No Email]
kirkin Ks,

04-24-2006 07:11:07




Report to Moderator
 Re: tractor parades, in reply to Randy in NE, 04-24-2006 04:12:01  
Hi Randy,
Yea i was,
this is the 1st one we did here in alton osborne area,and all the guy,s were going at least 10 and 15 miles an hour,
that,s why i had to clutch it at time,s , cause this guy in front of me was slowing down all the time,& I didnt wanna run into him,
Randy, If i was in 3rd 0r 4th,than id be creeping along,
I wanted to do that, but all the other guy,s were going too fast, and they wouldnt slow down,
It was like a bunch of robot,s randy, all doing what they thought was ok , but it wasnt,
I got this feeling like they thought they had to hurry,and get done with the parade,to get to the field and plow by 1;00,
Now you see this plight,I think It was a little ridiculous really,
But I just followed along , and didnt say anything,
ii wish you woudve been there to drive with me , so at least i knew somebody to be with instead of a bunch of stranger,s like this was,
Maybe It will be better next year randy and the thing will be better organized,
Take it easy ,ok.
Kirk,

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy