Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

W-6 Foible,s

Welcome Guest, Log in or Register
Author 
kirk in Kansas,

04-15-2006 05:27:41




Report to Moderator

I was working on My W-6,
Pulled the head off,and saw that it wasnt torqued
down the right way when It was sitting in the barn before i got it,
so evidently when I started to drive it it was gettting all annealed and it loosened up a little, then it started to leak antifreeze into the head,and that,s why I saw white smoke with a little moistness in it coming out of the stack,
So now Ill get it fixed,and it will be done and no more glitche,s

[Log in to Reply]   [No Email]
KEB

04-15-2006 09:51:03




Report to Moderator
 Re: W-6 Foible,s in reply to kirk in Kansas,, 04-15-2006 05:27:41  
Highly recommend you take the head to a machine shop, have it checked for flatness & re-surfaced if necessary. Good chance it's a little warped if it got to operating temperatures without being properly torqued. Doesn't cost much, & the new head gasket may not last long if you don't.

Keith



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy