Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

350U Hydraulic Hoses

Welcome Guest, Log in or Register
Author 
Matt Steele

03-26-2006 19:32:50




Report to Moderator

I'm replacing the two rear hoses that run the fast hitch cylinder and one hose is very difficult to get at where it goes out from the control valve. It looks like I have to take the valve off just to get at the end of the hose. If anyone has some experience with this, advice would be greatly appreciated. One repair manual I have says that removing the control valve on the 350U is "evident", I hope that means easy.

[Log in to Reply]   [No Email]
the tractor vet

03-26-2006 19:35:58




Report to Moderator
 Re: 350U Hydraulic Hoses in reply to Matt Steele, 03-26-2006 19:32:50  
That is why they make angelhead wrenches or crow feet wrenches never had to pull the valve to replace a hose yet .



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy