Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Hole in Super M manifold

Welcome Guest, Log in or Register
Author 
jeffalex2

03-20-2006 04:21:26




Report to Moderator

My new Super M has a hole, about 1/4" round in the top of the #3 bend in the exhaust manifold. I'm gonna get a new manifold (or patch the hole), but, am I in immediate danger of damaging the #3 exhaust valve by running it with the hole there? Thanks!!




[Log in to Reply]   [No Email]
Janicholson

03-20-2006 10:14:08




Report to Moderator
 Re: Hole in Super M manifold in reply to jeffalex2, 03-20-2006 04:21:26  
Drill it and tap it for a 1/8"npt pipe plug, (it is bigger than 1/4" in thread size.
JimN



[Log in to Reply]  [No Email]
Bob M

03-20-2006 04:54:17




Report to Moderator
 Re: Hole in Super M manifold in reply to jeffalex2, 03-20-2006 04:21:26  
Won't hurt the exhaust valve a bit.

Only risk is of escaping exhaust gases burning thru the hood tin. (And possibly to the operator from breathing fumes escaping out the rear of the hood!)



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy