Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

hey tractor vet

Welcome Guest, Log in or Register
Author 
River Bottom Fa

03-12-2006 11:06:02




Report to Moderator

how much play should i have in my driveshaft coupler on my 39 h already replaced tapered bolts and the rubber shock washers bot still have a little slop just about ready to mount engine up to clutch housing and wanted to get your advice before doing this. makes it alot easier to work on with engine out of the way and didnt want to jump the gun. Thanks RBF




[Log in to Reply]   [No Email]
Aces

03-12-2006 18:30:10




Report to Moderator
 Re: hey tractor vet in reply to River Bottom Farmer, 03-12-2006 11:06:02  
River Farmer If you have play you did not put all the right parts in.



[Log in to Reply]  [No Email]
the tractor vet

03-12-2006 14:14:22




Report to Moderator
 Re: hey tractor vet in reply to River Bottom Farmer, 03-12-2006 11:06:02  
Now even with the new bolts and new rubbers you may have some slop as she ain't new and was use tomuch when it was new . Even rubber can ware steel over time .



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy