Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 with a 806 head help!!!!!!!

Welcome Guest, Log in or Register
Author 
VOLfarmall

02-10-2006 06:35:58




Report to Moderator

I have a 560 gas that I use for a pulling tractor. Also Ihave a 706 gas that runs real good both have the 263 engine I was going to switch the heads because the 706 has a higher compression ratio ,when I got the heads off I checked the numbers and the head from the 706 came off of a 806. the 560 has the step head pistons in it and the 706 has a different piston it looks like barn roof right in the middle but it is not as high as the 560's. the problem is when I put the 706 head on the 560 the pistons hit the head. What kind of pistons do I need in the 560 to make this work.

[Log in to Reply]   [No Email]
Jim J

02-10-2006 21:17:12




Report to Moderator
 Re: 560 with a 806 head help!!!!!!! in reply to VOLfarmall, 02-10-2006 06:35:58  
If you put the 706 pistons in the 560 it will work. I have rebuilt several 560's and put 706 heads and pistons in them. It makes a strong running 560



[Log in to Reply]  [No Email]
IaGary

02-10-2006 09:09:15




Report to Moderator
 Re: 560 with a 806 head help!!!!!!! in reply to VOLfarmall, 02-10-2006 06:35:58  
I can't help you but if you go to the pulling forum on this web site I bet they know the answer to your question.
Good Luck.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy