Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

need an F-12 carb expert

Welcome Guest, Log in or Register
Author 
billyandmillie

01-26-2006 14:22:27




Report to Moderator

third party image

Hi all. I have an F-12 that has developed carb problems. When I took the carb apart, I discovered several things right off the bat, 1)-the gasket shrunk and was sucking air between the two body halves, 2) a small tube was laying in the bottom of the bowl, it has a small orfice hole in it, where does it go??, and 3) the float is half filled with gas. Is there a fix for the float or do I buy a new one. My main concern is this small tube, about 1/8" diam and 3/8" long. Thanks, Rick

[Log in to Reply]   [No Email]
billyandmillie

01-28-2006 04:42:22




Report to Moderator
 Re: need an F-12 carb expert in reply to billyandmillie, 01-26-2006 14:22:27  
Everything is fixed, and Thanks goes out to the private forum message I received with the location and fix for my problems. You're a life saver. Thanks again, Rick



[Log in to Reply]  [No Email]
John M

01-26-2006 14:50:03




Report to Moderator
 Re: need an F-12 carb expert in reply to billyandmillie, 01-26-2006 14:22:27  
Replace the gasket and get a new float.I cant think of what the tube would be unlees its the seat for the needle valve but that should be obvious.Rice Equipment has the float and gasket,but I have seen the float on ebay cheaper,but only by a few bucks.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy