Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

rebuilding steering on SA

Welcome Guest, Log in or Register
Author 
banjo

01-19-2006 07:05:20




Report to Moderator

How do you remove bushings and seals on steering gear housing. which way do they come out?And how hard are they to replace? I have it disassembled, shaft out , base off and sector out.
Thanks.




[Log in to Reply]   [No Email]
banjo

01-19-2006 20:27:51




Report to Moderator
 Re: rebuilding steering on SA in reply to banjo, 01-19-2006 07:05:20  
I was looking at the online parts section at the steering gear rebuild kit. I see 2 bearings, bushings, gasket and 2 other items. does anybody know if those are the seals? becouse i did not take anything else out of mine. I hav'nt removed the bushings or seals yet. still getting 50 years of crud out of the way.

also i need a new woodruff key for the sector. parts house here does not have one long or tall enuff.are these odd ballsize?

Thanks. i know i ask some pretty basic questions, but i am just trying to not overlook anything.

[Log in to Reply]  [No Email]
Janicholson

01-20-2006 06:16:11




Report to Moderator
 Re: rebuilding steering on SA in reply to banjo, 01-19-2006 20:27:51  
Purchasing a key with the correct dimensions is important (check Motion Industries). If not available, the thickness of a fatter key can be surface ground (inexpensively) to be exact.
JimN



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy