Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Putting 291 Gas Engine in 460? Tractor Vet or othe

Welcome Guest, Log in or Register
Author 
migraine

01-18-2006 19:42:23




Report to Moderator

We took apart the 291 gas engine out of the 666 and it needs head work and new rings. Four exhaust valves were broken at the seats and bad valve guides. This head was just worked over a few years ago but I think thay had the valves set way too tight or??? Will replace the rod and main bearings and new rod bolts while we are at it. Then would like to mount in 460 Farmall that I've had setting around that I got for nothing. Question as if this will mount in there with the narrow frame and if the front cover off a 221 or 263 will interchange. Probably have to use the clutch and flywheel off the 460 right? What else have I not Thought about? Or sell the 460 with fast hitch and try to find a later model 56 or 66 series which we don't have many of around here. I need some straight talk here. You won't hurt my feelings. Migraine

[Log in to Reply]   [No Email]
K.B.-826

01-18-2006 21:28:19




Report to Moderator
 Re: Putting 291 Gas Engine in 460? Tractor Vet or in reply to migraine, 01-18-2006 19:42:23  
It will be a bolt-in deal. You'll need to use the 460 front cover, and possibly the rear plate. I know the 656, 666, and 686 used a smaller flywheel and clutch than a 560 or a 706, ect., but I don't know if they were the same size as a 460. Dosen't matter though, because your 460 flywheel will bolt up. Might have to enlarge the exhaust pipe hole in the hood, if you're using the 666 manifold, which I recommend.

[Log in to Reply]  [No Email]
Aces

01-18-2006 20:21:22




Report to Moderator
 Re: Putting 291 Gas Engine in 460? Tractor Vet or in reply to migraine, 01-18-2006 19:42:23  
Migraine Should be same block, you will need to change mounts off the 460.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy