Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

8060 DC head

Welcome Guest, Log in or Register
Author 
redpowerman22

01-12-2006 17:48:25




Report to Moderator

what is a 8060 DC head worth that has had the valves ground with new seats.it has also been ported,polished and milled.it has 7 pulls on it since it was redone.




[Log in to Reply]   [No Email]
RustyFarmall

01-12-2006 22:29:57




Report to Moderator
 Re: 8060 DC head in reply to redpowerman22, 01-12-2006 17:48:25  
I'd want to know how much has been milled off of it? It might be ready for China.



[Log in to Reply]  [No Email]
JakeF

01-12-2006 20:32:31




Report to Moderator
 Re: 8060 DC head in reply to redpowerman22, 01-12-2006 17:48:25  
I would'nt go more than 350.00-400.00 as the 8060 is the poorest of the good heads for an M-450. You'd be better off to find a 450 or 450LP, but they run 400-1200.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy