Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

swapping motors

Welcome Guest, Log in or Register
Author 
stephen j

01-10-2006 18:50:25




Report to Moderator

does any one now if a striaght c motor will fit on a super c and how hard it would be to change




[Log in to Reply]   [No Email]
billde

01-10-2006 18:55:24




Report to Moderator
 Re: swapping motors in reply to stephen j, 01-10-2006 18:50:25  
no problem, major external difference is the water pump and it will bolt right on the C block.



[Log in to Reply]  [No Email]
Jack in Ohio

01-11-2006 07:29:34




Report to Moderator
 Re: swapping motors in reply to billde, 01-10-2006 18:55:24  
The water outlet housing at the top of the super is bigger to match the radiator inlet. The housings can be swapped.If you are keeping the water pump from the super, leave the thermostat in the outlet. If you don't put the water pump on the new engine be sure to take the thermostat out of the outlet or the thermosiphon cooling won't work.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy