Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Firecraters for H

Welcome Guest, Log in or Register
Author 
Kevin

01-07-2006 18:24:03




Report to Moderator

I am look at ordering a set of NOS firecrater pistons and sleeves for my farmall H. First i am wondering about the word "set", should this be all 4? Another question is im not sure if mine has firecrater pistons or not yet becuase i didnt pull her apart. But i am wondering if it doesnt was anything else diffierent on the tractor if it had firecrater pistons? Are the valves still the same? If i pull the oil pan will there be any identification if she has firecraters or not or will i have to pull the head?

[Log in to Reply]   [No Email]
CNKS

01-07-2006 20:09:16




Report to Moderator
 Re: Firecraters for H in reply to Kevin, 01-07-2006 18:24:03  
I think the only internal parts changed were the pistons, but the distributer cam and springs were also different, apparantly the distributer advance was changed -- you really need a parts book to pick out the differences, and as others say, make sure you order the right sleeves.



[Log in to Reply]  [No Email]
El Toro

01-07-2006 18:57:13




Report to Moderator
 Re: Firecraters for H in reply to Kevin, 01-07-2006 18:24:03  
A set should be four or whatever is required in
a set. Some engines may require 6 in a set for a 6 cylinder engine. Hal



[Log in to Reply]  [No Email]
MagMan

01-07-2006 18:37:49




Report to Moderator
 Re: Firecraters for H in reply to Kevin, 01-07-2006 18:24:03  
hi Keven, If I was you I would pull the head first. To see what measurment you have already and to make sure no one has bored her out to acept SH sleves or anything like that. I guess you could tell by removing the pan but if you are going to tear her down any ways well might as well pull the head . You can sometimes look in the spark plug hole and see with a light what you have as far as piston shape. JON

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy