Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

super m gasket kit

Welcome Guest, Log in or Register
Author 
redpowerman

12-26-2005 17:42:37




Report to Moderator

i was looking at the complete gasket set for a super m on this website.it says for c-248 through c-281 with stepped head pistons. im putting domed IH Firecraters in mine,will it matter if i get the gasket kit that says for tractors with stepped head pistons?




[Log in to Reply]   [No Email]
riverbend

12-27-2005 05:31:12




Report to Moderator
 Re: super m gasket kit in reply to redpowerman, 12-26-2005 17:42:37  
As long as the gasket set fits the motor, they should work, regardless of what pistions are in it. Firecrater is IH's name for stepped head pistions.

If you are concerned about the piston hitting the head you will have to measure the clearance. Unless you have gone crazy with the cam, the valves touching the pistons should not be a problem either.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy