Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

farmall 560 (not utility)

Welcome Guest, Log in or Register
Author 
Justin Wiseman

12-19-2005 13:19:21




Report to Moderator

Can anyone tell me if the farmall 560 sheet metal is interchangeable with the 460 and 660?Thanks for any help Justin




[Log in to Reply]   [No Email]
Justin Wiseman

12-20-2005 07:09:21




Report to Moderator
 Re: farmall 560 (not utility) in reply to Justin Wiseman, 12-19-2005 13:19:21  
I need the lower grill, both radiator side pannels, both front white trim pieces that go under the hood, and one back right side white trim piece. I have heard the metal is interchangeable but I was wanting to make sure before anything was bought



[Log in to Reply]  [No Email]
migraine

12-19-2005 22:21:57




Report to Moderator
 Re: farmall 560 (not utility) in reply to Justin Wiseman, 12-19-2005 13:19:21  
I believe you will find that the hood for a 460 is shorter than the 560 or 660. I have used a 660 hood on a 560 but the 560 hood was too long for the 460 when I redid the last one. The radiator side panels and battery covers are the same for 460 and 560 but the battery covers are different on the right side for a 660 because no cutout for the hydraulic levers. There was 460 International utility but never a 560 or 660 utility. Migraine

[Log in to Reply]  [No Email]
migraine

12-19-2005 22:20:57




Report to Moderator
 Re: farmall 560 (not utility) in reply to Justin Wiseman, 12-19-2005 13:19:21  
I believe you will find that the hood for a 460 is shorter than the 560 or 660. I have used a 660 hood on a 560 but the 560 hood was too long for the 460 when I redid the last one. The radiator side panels and battery covers are the same for 460 and 560 but the battery covers are different on the right side for a 660 because no cutout for the hydraulic levers. Migraine



[Log in to Reply]  [No Email]
Wardner

12-19-2005 19:49:09




Report to Moderator
 Re: farmall 560 (not utility) in reply to Justin Wiseman, 12-19-2005 13:19:21  
Most the 560 sheet metal is interchangeable to 660 except the "side sheet". That is the dog leg at the front. The 660 is three inches taller. That three inches can be removed as it is attached with spot welds.

There are a few diferences depending on whether the tractor is gas or diesel. The same applies regarding diferrent hydraulic setups. I also noticed a few parts have a serial # cut-off which would indicate early tractors are slightly different than later tractors.

You should indicate what parts you need and I can look them up. I have a 460 book too. I think there is alot of interchangeability on all three models.

[Log in to Reply]  [No Email]
Justin Wiseman

12-19-2005 13:40:39




Report to Moderator
 Re: farmall 560 in reply to Justin Wiseman, 12-19-2005 13:19:21  
I guess the tractor is a utility sorry about that



[Log in to Reply]  [No Email]
CNKS

12-19-2005 14:29:31




Report to Moderator
 Re: farmall 560 in reply to Justin Wiseman, 12-19-2005 13:40:39  
If it is a 560 anything it is not a utility.



[Log in to Reply]  [No Email]
Harold H

12-19-2005 13:47:24




Report to Moderator
 Re: farmall 560 in reply to Justin Wiseman, 12-19-2005 13:40:39  
If it is a Farmall, it is not a utility.

Harold H



[Log in to Reply]  [No Email]
Harold H

12-19-2005 13:50:19




Report to Moderator
 Re: farmall 560 in reply to Harold H, 12-19-2005 13:47:24  
Also, most 460 and 660 sheet metal is different from 560 sheet metal.

Harold H



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy