Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

crankcase breather tube

Welcome Guest, Log in or Register
Author 
Kent in NB

12-18-2005 16:36:22




Report to Moderator

Any ideas for reattaching the breather tube onto the Donaldson air cleaner? Mine looks to have been rattled a hole much larger than the original. Parts book is not clear. Iam thinking of an epoxy patch and drill out a new hole. Thanks.




[Log in to Reply]   [No Email]
Janicholson

12-18-2005 16:54:07




Report to Moderator
 Re: crankcase breather tube in reply to Kent in NB, 12-18-2005 16:36:22  
I would use a steel washer to fit the tube.
Curve it with a bit of pounding to the curve on the cleaner body and braze the pieces in place.
This keeps the heat from breaking down the plastic of the JB weld, and is permanent.
JimN



[Log in to Reply]  [No Email]
Kent in NB

12-19-2005 05:30:51




Report to Moderator
 Re: crankcase breather tube in reply to Janicholson, 12-18-2005 16:54:07  
Sounds good Jim! I guess I named this pipe wrong. It should be the cylinder head breather pipe.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy