TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

806 PTO/Clutch

Welcome Guest, Log in or Register

Author

Hoss4702

12-03-2005 02:48:25

Report to Moderator

Morning,

I have a puzzler, well, for me anyway. Dad's 806 has a problem...when at lower RPM's, and steering mostly to the left or right, the tractor will stop, and lurch ahead, almost as if someone stepped on the clutch for a second or two, then dumped it. He says if you rev it up a little more, it won't do it. Any ideas? Also, when he's grinding feed, he says it acts like the PTO is slipping, then it will take off and pull the tractor down like it is working the way it is supposed to. It takes at least 10 seconds for the PTO to engage, no matter the temp. Are all these problems related? The clutch itself feels okay, doesn't slip, etc. Thanks in advance.

Hoss

[Log in to Reply] [No Email]

the tractor vet

12-03-2005 05:39:37

Report to Moderator

Re: 806 PTO/Clutch in reply to Hoss4702, 12-03-2005 02:48:25

First off change the hdy oil and filter . If no change in anything then ya got a problem with the Mcv pump and or the MCV it's self with out running a pressure test and a flow test you are shooten in the dark as to weather it is a pump problem or a spring or a sticking valve . On the PTO may be a littel air getting sucked past the suction line seal or a bad pump on that one , Maybe low oil level

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy