Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Cleaning a Woods Mower

Welcome Guest, Log in or Register
Author 
Hugh MacKay

11-06-2005 14:08:09




Report to Moderator

Ever since getting my Woods Mower cleaning has been the down side. I can't tip the Super A on it's side like the old push mower or even as I see some folks doing with their little ride ons. Each time I finish mowing I use water hose with mower running and that gets some of that grassy crud off. Then there is that variety of scrapers, garden hoes and brushes.

Discovered a new way, and a good clean up for end of mowing season. My driveway is about 400' with farm fields on both sides in a rotation of corn, beans and wheat. Field on west side is about 15" lower than driveway, while field on east side is about 6" higher than driveway. Corn stalks from behind combine are great on the west as they hold back snow. They do the same on west side, so much so that it becomes difficult to push snow back. Since our prevailing wind is west, then east is the direction I want to push snow. No point in putting where it blows right back.

Yesterday I decided to mow off 12 rows of corn stalks. That mixture of stalks, husks and cob make quite rugged work for a little finish mower. Lot of thumping and banging under the deck. When I finished I discovered this corn stalk mowing cleaned the under side deck as well as if I had sand blasted it. Not only clean but corn plant material puts a nice wax finish on equipment, thus mower will not get a build up of rust over winter.

That 1/2 hour of corn stalk mowing saved 3 hours of scraping and brushing.

[Log in to Reply]   [No Email]
sc otty

11-07-2005 04:45:42




Report to Moderator
 Re: Cleaning a Woods Mower in reply to Hugh MacKay, 11-06-2005 14:08:09  
Hi Hugh, Sounds like it works but must raise heck with the blades. I would think they would have to come off for resharpening after that excersize!

scotty



[Log in to Reply]  [No Email]
Hugh MacKay

11-07-2005 15:30:11




Report to Moderator
 Re: Cleaning a Woods Mower in reply to sc otty, 11-07-2005 04:45:42  
scotty: It is the end of the mowing season, they need to be sharpened anyhow. Corn plant material itself wouldn't take the edge off blades any more than grass. Back in my farming days and silage cutter doing grass and legumes was always harder on knives than corn, as it applies to keeping them sharp. Forign objects and stones are your worst enemy on keeping kinves sharp, in both cases.

The noise was as much the volume of material being cut. It didn't cut the engine rpm even a little. I know if I tried mowing that volume of grass it would affect rpm. Coarse stemed material always mows easier than fine stem material.

[Log in to Reply]  [No Email]
Paul Shuler

11-06-2005 15:35:20




Report to Moderator
 Re: Cleaning a Woods Mower in reply to Hugh MacKay, 11-06-2005 14:08:09  
In MO Hugh we have enough rocks sticking up to keep the grass beat off the underside of the deck. A rock the size of a softball makes an awful racket.



[Log in to Reply]  [No Email]
RustyFarmall

11-06-2005 15:15:57




Report to Moderator
 Re: Cleaning a Woods Mower in reply to Hugh MacKay, 11-06-2005 14:08:09  
I always mow off the sweet corn patch with my woods finish mower, you're right, it does make a lot of noise, but gets the job done.



[Log in to Reply]  [No Email]
Dave BN

11-06-2005 14:20:07




Report to Moderator
 Re: Cleaning a Woods Mower in reply to Hugh MacKay, 11-06-2005 14:08:09  
I mow dry leaves or run the mower over a sandy area with my 16HP garden tractor (Gravely). Still haven't found a good way to sharpen blades without taking them off. Dave.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy