Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

M runs only wide open

Welcome Guest, Log in or Register
Author 
PeteF

10-29-2005 17:53:56




Report to Moderator

Even though the throttle linkage works fine, my M will run only wide open. I cannot adjust the motor RPM at all. Thanks in advance.




[Log in to Reply]   [No Email]
old

10-29-2005 18:13:39




Report to Moderator
 Re: M runs only wide open in reply to PeteF, 10-29-2005 17:53:56  
Sounds like you have had the carb off and didn't get it lined up right. It can be a little tricky getting it back on as it should be.



[Log in to Reply]  [No Email]
What's wrong with that?

10-30-2005 08:55:37




Report to Moderator
 Re: M runs only wide open in reply to old, 10-29-2005 18:13:39  
I'll bet old is right again. My nickel Dick Davis



[Log in to Reply]  [No Email]
old

10-30-2005 09:59:17




Report to Moderator
 Re: M runs only wide open in reply to What's wrong with that?, 10-30-2005 08:55:37  
I had a friend that did the same thing on a 450 and I ended up haveing to go fix it for him. But I'm also the guy that does 99% of the wrench turning on his tarctors and trucks. LOL



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy