TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

My H has a hole in it, Two holes !!

Welcome Guest, Log in or Register

Author

VanO

10-28-2005 11:54:54

Report to Moderator

Hi All; On the grill of an H there is two holes below the Farmall emblem. I think the pipes behind the grill is call the bolster? There are two holes in this framework cororsponding to the two holes in the grill. What went there?
Thanks, VanO

[Log in to Reply] [No Email]

Wardner

10-28-2005 15:08:44

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to VanO, 10-28-2005 11:54:54

Here ya go. Picture of bracket and grill should be loading. If not, click on link or go to "Galleries > Parts and Pieces" found on left side of this page

Bracket

[Log in to Reply] [No Email]

Wardner (no red X)

10-28-2005 15:46:12

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to Wardner, 10-28-2005 15:08:44

Just figured out how to copy picture from "Galleries". You have to click on "properties" while over the image and select and copy the URL from that page. Then paste it in "Optional Image URL" on the composition page.

[Log in to Reply] [No Email]

captaink

10-28-2005 11:57:05

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to VanO, 10-28-2005 11:54:54

A brace to the outside end of the frame of a four-row mounted cultivator. Possibly other mounted equipment also.

[Log in to Reply] [No Email]

Allan in NE

10-28-2005 12:19:12

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to captaink, 10-28-2005 11:57:05

Yep,

2-row wide, 6-row narrow cultivators as well as the lift mechanism for the bean cutters. All kinds of nice stuff bolted there. :>)

Allan

[Log in to Reply] [No Email]

RustyFarmall

10-28-2005 14:01:05

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to Allan in NE, 10-28-2005 12:19:12

The framework for the anti-sway apparatus on a McCormick #31 loader attaches to those holes also.

[Log in to Reply] [No Email]

goterdone

10-29-2005 15:17:27

Report to Moderator

Re: My H has a hole in it, Two holes !! in reply to RustyFarmall, 10-28-2005 14:01:05

My H has a brakret for the loader bolted there. If you use these holes to bolt something. Dont forget to use a bushing so you wont crush the grill. A piece of 3/8 or 1/2 in pipe about 11/2 in long.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy