TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Will a IH Model 33 Loader fit an H?

Welcome Guest, Log in or Register

Author

Junkman10

10-27-2005 23:20:28

Report to Moderator

I have a IH model 33 loader on a M for sale and someone wants to know if it will mount on a H? If so any modification to make it work?

[Log in to Reply] [No Email]

Wardner

10-28-2005 11:35:27

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Junkman10, 10-27-2005 23:20:28

IH furnished a pair of spacers with the loader when it was fitted to a H. They bolted to the bolster. If I get a chance, I will post a picture later.

[Log in to Reply] [No Email]

Wardner w/pic

10-28-2005 15:21:27

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Wardner, 10-28-2005 11:35:27

Not to proud of this pic. Let me know, by email, if you want better pics and measurements.

[Log in to Reply] [No Email]

Hugh MacKay

10-28-2005 16:10:22

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Wardner w/pic, 10-28-2005 15:21:27

Wardner: Are you sure that is mounting hardware for a IH 33 loader? We had a 33 loader on a Farmall 300, and there was nothing but two braces hooked into side chanel beside engine. Those braces had two holes on each end giving adjustment for various tractors. The braces went to frame attached to axle housing and hooked to it just below pivot point of loader arms.

To me that plate in your photos looks more like the mounting for newer loader series that were painted white from factory. Models 2000 and 2001 come to mind. I had a 2000 loader also on my 560.

[Log in to Reply] [No Email]

Wardner

10-28-2005 17:03:50

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Hugh MacKay, 10-28-2005 16:10:22

Hugh,

You could be right. I bought the loader (can't remember if it is a 31 or 33) from a guy who gave me the spacers with the sale. I have never put the loader on my H. I seem to recall that he asked me what tractor I was going to use. When I said H, he produced the brackets.

I photocopied a 33 loader manual from a friend some years back. If I knew where it was, I could answer your question with more authority.

[Log in to Reply] [No Email]

Hugh MacKay

10-29-2005 00:28:26

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Wardner, 10-28-2005 17:03:50

Wardner: There is another possibility that being model 34. It had the loader sub frame go from axle housing right around front, quite similar to a Wagner. It was advertized as fitting Utility tractors. I do know of one 34 that went on a Farmall when new.

The reason I questioned you in beginning, was the mount looked similar to part that went on my 560 or 656 for the model 2000 loader, especially the part loader frame would contact.

[Log in to Reply] [No Email]

RustyFarmall

10-28-2005 20:27:08

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Wardner, 10-28-2005 17:03:50

Those pieces are not part of a #31 either.

[Log in to Reply] [No Email]

Ernest

10-28-2005 07:02:37

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Junkman10, 10-27-2005 23:20:28

The frame on the H is 2 inches narrower than the M.

FWIW!

[Log in to Reply] [No Email]

Marv

10-28-2005 20:51:49

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Ernest, 10-28-2005 07:02:37

I have a #33 IH loader on a SH and it fits like a glove.

[Log in to Reply] [No Email]

Marv

10-28-2005 20:51:23

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Ernest, 10-28-2005 07:02:37

I have a #33 IH loader on a SH and it fits like a glove.

[Log in to Reply] [No Email]

Hugh MacKay

10-28-2005 00:01:21

Report to Moderator

Re: Will a IH Model 33 Loader fit an H? in reply to Junkman10, 10-27-2005 23:20:28

Junkman: Yes a 33 loader will fit an H. Don't be surprised if it takes a few minor modifications. It may not work if H has wide front with tyrods out front.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy