Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Hydrolic lift

Welcome Guest, Log in or Register
Author 
Larry Dillon

10-27-2005 13:11:04




Report to Moderator

The lift on my Farmal C works fine with no load or a light load like a box blade, however with heavier loads like a bale spike it will not lift the bale and the lift only comes up part way. Is this a fluid issue? Weight issue? or just tractor capacity issue? Anyone had similar issues and solved it? I need to move some big round bales.




[Log in to Reply]   [No Email]
gene bender

10-27-2005 13:36:17




Report to Moderator
 Re: Hydrolic lift in reply to Larry Dillon, 10-27-2005 13:11:04  
The rockshaft lift was not designed to lift that much weight. You will have to go to a three pt lift with at least one cycl with a 3in dia better with one that has two cycls then your front wheels will come up. You are trying to lift 1000lbs or so and what you are now using wont do it.



[Log in to Reply]  [No Email]
Andrew Z

10-27-2005 13:16:18




Report to Moderator
 Re: Hydrolic lift in reply to Larry Dillon, 10-27-2005 13:11:04  
Is this on a loader or off the rocker arms?
Andrew



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy