TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Super C Pre Cleaner Again!!!

Welcome Guest, Log in or Register

Author

George Wallace

10-25-2005 14:16:22

Report to Moderator

I have been able to find a source for acrylic tubing the exact diminsions for the United Specialities Pre Cleaner that was an option for the Super C and maybe other farmall tractors. (Maybe even other brands also). Now I really need some help in finding a picture of an original pre cleaner that shows the decal on the pre cleaner plastic sleve. I can make the decal myself if I can just get a picture. Those of you that are thinking, "wonder how much he would charge to make me one?", well, it won"t be cheep. The tubing alone cost me $20.00 a foot and I can only get it in 8 foot lengths. I would imagine it would be in the $40 to $50 range. If you don"t care about the decal, maybe around $35. It does take some heating and shaping around the bottom. Any way, we"ll see who"s interested. In the mean time, I need that picture!

[Log in to Reply] [No Email]

leon

10-26-2005 03:57:50

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

Maybe you should make a small business out of this refurbishing this type precleaner, at least until your eight feet of tubing is used up. I too have a core that I'd sell reasonably.

[Log in to Reply] [No Email]

leon

10-26-2005 03:57:21

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

Maybe you should make a small business out of this refurbishing this type precleaner, at least until your eight feet of tubing is used up. I too have a core that I'd sell reasonably.

[Log in to Reply] [No Email]

Nebraska Cowman

10-26-2005 03:23:41

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

Humm, keep me posted, I will buy one or sell you the pre-cleaner that I have.

[Log in to Reply] [No Email]

leon

10-25-2005 17:32:08

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

Though badly warped and discolored from heat, mine had some unreadable markings on it. My parts book also shows a heat shield to be part of the "lid" that goes on the top of these things. I suspect many of the heat shields got lost and that's why so many of this type precleanes has bad plastic.

[Log in to Reply] [No Email]

Farmallhal

10-25-2005 14:45:04

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

George, you receive my daily ingenuity award for your approach to a workable solution. I used to live near Seattle, Washington, and between the pulp plants, breweries, Boeing aerospace and airplane plants, ship building, salvage and retrofit operations and with a little time anything, could be located in the way of material at the local salvage yards. Thanks for sharing, Hal

[Log in to Reply] [No Email]

Dave_Id

10-25-2005 14:56:52

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to Farmallhal, 10-25-2005 14:45:04

Boeing Surplus was always one of my favorite places to visit over there. I always tried to stop there every time over. Are they still open? I haven't been there in about 5 years.

[Log in to Reply] [No Email]

farmallhal

10-25-2005 15:19:48

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to Dave_Id, 10-25-2005 14:56:52

Dave, I'm sure they are as I was there last spring. They were still near Kent at 212th off of 167 I believe. Seems like days of operation is different now like late week and Saturday only. You should be able to find them on the Boeing website as I recall they used to be there. A couple other good salvage yards were Pacific Iron and Metal on 6th Ave. South, and Puget Sound Salvage, on 4th Ave. South. Also, Alaskan Brass and Copper was a good place if you needed new material like Stainless Steel, etc. or short pieces from their cut-off bins. I think there was another place called Metal Shorts in the same general area of south Seattle.
Good luck and send me an e-mail if you can't locate a phone no. as I still have lots of contacts at Boeing. Hal

[Log in to Reply] [No Email]

Dave_Id

10-25-2005 14:26:06

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to George Wallace, 10-25-2005 14:16:22

Mine is as original as can be, and mine don't have a decal.. I'll double check tonight though

[Log in to Reply] [No Email]

George Wallace

10-25-2005 17:07:53

Report to Moderator

Re: Super C Pre Cleaner Again!!! in reply to Dave_Id, 10-25-2005 14:26:06

The only reason that I think there is a decal is that the picture in the parts manual shows there to be one! I have never seen an original.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy