Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

help with farmallsupera

Welcome Guest, Log in or Register
Author 
kenneth roberts

10-18-2005 18:28:12




Report to Moderator

dose anybodie have a set of plans to build a 3 three point hitch for a super a




[Log in to Reply]   [No Email]
Hugh MacKay

10-19-2005 02:56:40




Report to Moderator
 Re: help with farmallsupera in reply to kenneth robertson, 10-18-2005 18:28:12  
Ken: It's really quite simple, you need a rear rock shaft that fits between fenders just behind the seat. That rock shaft will have a linkage to touch control rock shaft at left side of fuel tank. From there all you need is 3 point linkage from most any small tractor. Personally I'd fit a piece of heavy square tubing between final drives at point were drawbar attaches. I'd then fabricate mounting for lower links to that cross member. You can just fabricate mounting on final drives, however 3 point will work much better if lower links are no more than 18" apart where they attach to tractor. Your implements will tow much better. For the top link, fabricate mounting on center of rockshaft. E mail me I do have some photos that may help.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy