Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Engine swap

Welcome Guest, Log in or Register
Author 
Poorboy

09-29-2005 16:30:41




Report to Moderator

Will a SMTA, or 450 block mate with a late M drive train? If so how well? What parts will be needed for the job. I know where there is a 450 with some of the stuff I might need...




[Log in to Reply]   [No Email]
Nat

09-30-2005 05:00:06




Report to Moderator
 Re: Engine swap in reply to Poorboy, 09-29-2005 16:30:41  
It will bolt right up. They're essentially the same block casting, except the cylinders are bored out larger on the SMTA/450 block.



[Log in to Reply]  [No Email]
RN

09-30-2005 04:01:02




Report to Moderator
 Re: Engine swap in reply to Poorboy, 09-29-2005 16:30:41  
M block? M was grandfather to 450, father to SM. Mounting bolts same. Later engines have bigger bore/larger displacement=more HP. Think of engine family like smallblock chevy 283/327/350- engines can be swapped and bolted to different transmission in family.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy