Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Clutch Fork

Welcome Guest, Log in or Register
Author 
S/C BOB

08-28-2005 17:36:53




Report to Moderator

I removed the clutch,or throw out bearing fork on my S/C Farmall to clean the bellhousing, as I`m getting ready to install an engine. I can`t remember which way the fork was turned.The C fork is straight but the S/C is on an angle to the front or back on the bottom of fork.Any help would be great. Thanks Bobby




[Log in to Reply]   [No Email]
Randy in NE

08-29-2005 04:54:04




Report to Moderator
 Re: Clutch Fork in reply to S/C BOB, 08-28-2005 17:36:53  
I have a parts cd with a picture (worth a thousand words)of both the Auburn and the Rockford clutch. I would be glad to e-mail you an Adobe file with the picture of which ever one you have, or I could even send them both. My e-mail is uncovered.



[Log in to Reply]  [No Email]
S/C BOB

08-29-2005 05:29:15




Report to Moderator
 Re: Clutch Fork in reply to Randy in NE, 08-29-2005 04:54:04  
Hi Randy I don`t know the name of what I have but the bearing housing has two springs on it. One at the top and one on the bottom. Maybe this will help. Thanks Bobby



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy