Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

806 diff. lock? / turbo?

Welcome Guest, Log in or Register
Author 
lukas

08-26-2005 18:39:44




Report to Moderator

I have a IH 806 and I"m wondering if I can put a diff. lock on it for the pulls? Also need to know what to do for more low end power? I have a turbo but needs replacing"how do you determin how big to go?




[Log in to Reply]   [No Email]
the tractor vet

08-26-2005 21:21:13




Report to Moderator
 Re: 806 diff. lock? / turbo? in reply to lukas, 08-26-2005 18:39:44  
It can be done but ya need the parts out of and 826-1066 and as far as a hair dryer a 3LD or 3LM and if ya want to make enemys then a 3LS or if ya want to start a war then a holeset with a 3inch in and a 3 inch out and small housing. Then ya need to turn the wick up , Now if ya could only find a good RD pump it will put out more CC's of fuel then any old Rossamaster



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy