TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Holly Cow Bat Man!!! 706 engine kit.

Welcome Guest, Log in or Register

Author

Kelly C

07-27-2005 06:43:04

Report to Moderator

I was just getting ready to order the sleeve kit for my 706 w/c263 on line off the internet. $465 for the sleeves, pistons, rings and pins. No gaskets or any thing. I decided just for the heck of it to call my local IH dealer for a price. I was pleasantly suprised. I ordered a complete engine rebuild kit. Incl Main Bearings, Rod bearings, Pistons, sleeves, Rings, pins and all the Gaskets and seals. For $695 And I dont have to pay shipping.
WOW!

[Log in to Reply] [No Email]

EricB

07-27-2005 11:44:45

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

Just another example! I lost the gas cap off my W4 so I figured I would get a cap for the kerosene tank at the same time, just ot finish it off. Gas Cap was 3" diameter $4.50 Kerosene cape was 1" diameter $28.75.

[Log in to Reply] [No Email]

Jimmy King

07-27-2005 11:01:57

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

Never try to out guess an IH price, something you think will be $60 will be $400 and something you think will be $400 will be $60

[Log in to Reply] [No Email]

scotty

07-27-2005 11:04:57

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Jimmy King, 07-27-2005 11:01:57

Jimmy, thanks for the last e-mail!!!

scotty

[Log in to Reply] [No Email]

CNKS

07-27-2005 10:31:01

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

My dealer is competitive also, but his "cheaper" kits are not Case-IH, I believe mine sells Tisco -- I have heard that they are quality kits. In the engine kit thing, CIH has a lot of competition from quality manufacturers, thus the lower price. Not true for hard to find parts for which CIH may be the only source. For routine parts, I have never been able to figure why a part that should cost $10 costs $100, and the other way around, also.

[Log in to Reply] [No Email]

dej(JED)

07-27-2005 09:44:37

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

Try Seal Power stuff. I have gotten kits from the local auto parts and they beat them all price wise..

[Log in to Reply] [No Email]

RustyFarmall

07-27-2005 08:55:24

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

Kelly, I have also been pleasantly surprised several times at the local Case-IH dealer, and a couple of times I have experienced genuine sticker shock, but in the long run it pays to check with dealer first.

[Log in to Reply] [No Email]

scotty

07-27-2005 09:59:27

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to RustyFarmall, 07-27-2005 08:55:24

Rusty, I never know what to expect from my Case IH dealer! Last order was for all seals and gaskets for the rearend on my Super A including PTO and belt pulley seal, $160 with shipping. The week before all I bought a new govenor thrust bearing and 2 1/2 gals of hytran and the bill was over $50, you just never know, its allways an adventure!

scotty

[Log in to Reply] [No Email]

Dave_Id

07-27-2005 09:06:32

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to RustyFarmall, 07-27-2005 08:55:24

Ring gear at IH is around $22 for the 113 engine.. But a brake return spring for the Super C was around $15. EACH Don't figure.

[Log in to Reply] [No Email]

MN Scott

07-27-2005 21:03:54

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Dave_Id, 07-27-2005 09:06:32

Priced a new style thermostat water pump carrier for my 756 german diesel at the local CNH dealer. Just a small casting about 15 pounds, $900 bucks, WOW. Found one in a salvage yard for $160. A year ago I priced tierod ends for my 706. They were $12 cheaper thru CNH than aftermarket and no shipping, go figure. It pays to always check with the dealer.

[Log in to Reply] [No Email]

RustyFarmall

07-27-2005 09:17:32

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Dave_Id, 07-27-2005 09:06:32

Dave, that's kinda what I was getting at, some of it just doesn't add up.

[Log in to Reply] [No Email]

caseyc

07-27-2005 08:31:59

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to Kelly C, 07-27-2005 06:43:04

didn"t you just buy that tractor? didn"t know the motor was bad. that is a good price from case. is that a case kit or aftermarket?

casey

[Log in to Reply] [No Email]

Kelly C

07-27-2005 19:04:24

Report to Moderator

Re: Holly Cow Bat Man!!! 706 engine kit. in reply to caseyc, 07-27-2005 08:31:59

Yes I did and yes I did. I had hoped that it would take longer to start bugging me though.
It runs just fine. I could leave it go like the last guy and just live with it, but then I see that puff of smoke and go GRRRRR RRRR.
I just cant have that.
I want to keep this one so shes gona be right.
It also helps that my boss handed me $800 extra last week as a thank you for all the extra work I have been doing in July.
$800 off the house hold budget books is for sure going into some tractor around here.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy