Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

806 rear crank seal tool needed

Welcome Guest, Log in or Register
Author 
Tbone8

07-18-2005 14:41:26




Report to Moderator

Hi,
I need a 806 rear crank wear sleeve tool. Can anyone tell me where I can buy one. OTC no longer makes one.
Thanks in advance,
Tom




[Log in to Reply]   [No Email]
pcy1066

07-18-2005 17:49:09




Report to Moderator
 Re: 806 rear crank seal tool needed in reply to Tbone8, 07-18-2005 14:41:26  
all u need is a 10 inch by 8 inch flat peice of steal 3/8 thick, drill 2 holes to match your flywheel bolt holes oppiste sides, bolt it to crank with seal and sleve aginst crank draw it in flush, back it off put plastic spacer that comes with seal agains seal draw it flush again now your seal is set in place , bolt up your flywheel it will push the wear ring about 30 thsnds more, i have put several seals in 806, 666, 686, 966, 1066 and 1466 this way and never had a problem. sometimes from howard int the little plastic spacer is not in wuth the seal, i keep the spacers probly a dozen hanging on nails in my garadge, hope this helps and saves you some bucks, paul

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy